Takeuchi TB295W User Manual

8-11
OPTIONS
OPERATING LEVER SWITCH KIT 1
OPERATING LEVER SWITCH
KIT 1
HORN BUTTON
Press the button situated on the left
operating lever to blow the horn.
DECELERATION BUTTON
Before operating the deceleration button,
set the operating lever to the neutral
position and take your foot off the pedals.
If the deceleration button is pressed while
driving, the machine’s operating speed
will abruptly change to result in a
dangerous situation.
Press this button on the left operating lever
to lower the engine speed to low idling.
Press the button again to return to the
engine speed set with the throttle controller.
For safety reasons, it is designed that the
deceleration function is activated to set the
engine revolutions to low idling whenever the
engine is started.
Cancel the deceleration mode by pressing
the deceleration button as necessary.
Note: This deceleration button is capable of
decreasing the engine speed and reducing
the fuel consumption, with a simple
operation, in a situation such as when little
engine output is required and thus the
operating or the travel levers are in neutral.

Takeuchi TB295W Specifications

General

Brand	Takeuchi
Model	TB295W
Category	Excavators
Language	English