2-43
CONTROLS
SWITCHES
BEACON LAMP SWITCH
When this switch is turned on while the
starter switch is at ON, the lamp turns on as
follows:
OFF ....Off
ON .....Beacon lamp is lit
DIFF-LOCK SWITCH (IF EQUIPPED)
Pressing this switch while the starter switch
is turned on will temporarily lock the
differential gear, increasing the control
capability of the machine over bad roads.
OFF ....Unlocked
ON .....Locked
This switch is enabled only in the creeping
travel mode at 5 km/h.
This function helps prevent the machine from
getting bogged down in the mud or soft
ground, or stuck in the rocky area.
To Next Page
Loading...
Need help?
General
