Takeuchi TB295W User Manual

2-40
CONTROLS
SWITCHES
LIGHT SWITCH
When this switch is turned while the starter
switch is at ON, the lights turn on as follows:
OFF ....Off
ON .....Switch lamps, front light, boom light,
side lights and tail lamps will be lit.
SWING /SECOND BOOM SELECT SWITCH
It is dangerous to turn on this switch
while the boom swing /second boom
pedal is depressed, as the attachment
may move unexpectedly. Always set the
boom swing /second boom pedal back to
the neutral position before operating this
select switch.
This switch is used to select either the boom
swing operation or the second boom
operation.
When the second boom symbol side of the
switch is pressed, the second boom display
(b) appears on the LCD to indicate that the
second boom operation is enabled. When
the boom swing symbol side of the switch is
pressed, the swing display (a) appears on
the LCD to indicate that the boom swing
operation is resumed.
The actual boom swing /second boom
operation is performed with the boom swing
pedal.
Refer to “Boom swing /second boom pedal”
on page 2-47.
....... (a) swing display
....... (b) second boom display

Takeuchi TB295W Specifications

General

Brand	Takeuchi
Model	TB295W
Category	Excavators
Language	English