Takeuchi TB295W User Manual

2-41
CONTROLS
AUTOMATIC DECELERATION SWITCH
When the ON side of the switch is pressed,
the deceleration lamp in the instrument
cluster flashes. This flashing stops when the
deceleration function starts working, and the
lamp remains lit while in the deceleration
mode. The engine speed automatically drops
to low idle (deceleration mode) four seconds
after the control levers are set to neutral, to
reduce fuel consumption. Moving the control
levers will cause the speed to return to the
original engine speed.
Switching from the deceleration button to the
auto-deceleration switch will first return to
the engine speed set with the throttle
controller. Then, the engine will automatically
enter the deceleration mode (low idling) if the
control levers are not operated within four
seconds.
SWITCHES
POWER MODE SWITCH
While in the traveling mode, the power mode
is always used.
• Pressing the PWR symbol side of the
switch turns on the Power mode indicator
lamp on the instrument cluster.
The maximum engine output is obtained.
• STD mode: Pressing the blank side of the
switch will turn off the power mode
indicator lamp.

Takeuchi TB295W Specifications

General

Brand	Takeuchi
Model	TB295W
Category	Excavators
Language	English