Takeuchi TB295W User Manual

3-15
OPERATION
OPERATING THE MACHINE
STOPPING TRAVEL
• Park the machine on a flat, rigid and
safe ground. Set the parking brake. If
you must park on a slope, chock the
tracks to block the machine.
• If any of the controls is accidentally
touched when it is unlocked, the
machine may suddenly move and cause
serious injury or death.
Never stop running the machine suddenly
except in emergency. Stop in good time,
if possible.
1. Slowly step on the brake pedal to stop the
machine.
2. Depress the brake pedal all the way down
to lock it.
OPERATING THE WORKING EQUIPMENT
• Before starting operation, carefully
check which lever pattern you are going
to use.
• It is described using the ISO pattern in
this manual.
Use the right operating lever to operate the
boom and bucket.
Use the left operating lever to operate the
arm and slewing.
Return the operating levers to the neutral
position to stop the working equipment.
1. Release the slew/swing lock pin.
2. Depress the brake pedal all the way down
to engage the pedal lock.
3. Press the ram lock switch to lock the
suspension of the front axle.
4. Lower the dozer blade to the ground.
5. Lower the safety lock lever to the unlock
position.

Takeuchi TB295W Specifications

General

Brand	Takeuchi
Model	TB295W
Category	Excavators
Language	English