2-5
CONTROLS
COVERS
TOOL BOX
Opening
FUEL FILLER PORT
• Never jump down from the machine or
the work bench. When getting on or off
the machine or work bench, use the
steps, handrails or work bench to
support your body. Your weight should
be evenly distributed among the three
contact points (one hand and two feet
or two hands and one foot).
• Do not smoke and keep away from heat
or flame while filling the fuel tank.
• Fill the fuel tank in a well ventilated
place, with the engine turned off.
• Clean up spilled fuel immediately.
• Do not fill the fuel tank to capacity.
Allow room for oil expansion.
• Securely tighten the fuel filler cap.
Opening
1. Insert the starter key and turn it
counterclockwise to unlock the tool box
cover (1).
2. Open the cover (1).
Closing
1. After using tools, store them back in the
tool box.
2. Close the cover (1).
3. Insert the starter key and turn it clockwise
to lock the tool box.
· Maximum permissible load: 75 kg (165 lb.)
1. Open the right side cover.
2. Turn the fuel cap (1) counterclockwise and
remove it.
Closing
1. Turn the fuel cap (1) it clockwise and close
it.
2. Close the right side cover and lock it.
To Next Page
Loading...
Need help?
General
