19
M_T08_EN_B
Z axis conguration
• Limitation
Maximum path of axis
• Activation of the Turbo button (manual mode)
Enable the function in the programme (marking parameters).
Press simultaneously on the 2 side buttons on the head.
• Activation of the buzzer
The machine emits an audible signal when the motorized axis is in operation.
Gravotech recommends the use of audible and light warnings, especially when an
operator is present. It is possible to deactivate the audible signal associated with
movement.
The deactivation of the audible signal is the sole responsibility of the user and any
person under whose authority the user is placed.
Only trained personnel aware of the risks posed by the machine are authorized to use it.
Personnelmustbesuretocomplystrictlywithallapplicablesafetyobligationsspecied
by Gravotech or by the legal or regulatory provisions in force.
• Sensing (sensing option of the motorized Z-axis) (electromagnetic version only)
This option is activated by default. Used to detect automatically the surface of the part to be marked. Use this
mode when the position of the surface to be marked is not known.
New elds appear on the screen in "Sensing" mode.
To Next Page
Loading...
Need help?
General
