Getting Started
Convenience Features
e*Scope Web-based Remote Control. Yo u can access your TDS3000C
oscilloscope through the Inter
net, from across a room to across the
world. (See page 144.)
Built-in Ethernet. You can connect your TDS3000C oscilloscope to a
network or the Internet using the built-in 10 BaseT Ethernet port, for
e*Scope access or printing screen images to network printers. (See
page 181.)
Autoset. You can use Autoset to quickly set up the verti cal, horizontal,
and trigger controls for a usable display. (See page 60.)
Scope Q uickMenu. You can use the built-in Scope QuickMenu for
simplified oscilloscope operation. (See page 25.)
Single Sequence.
One button sets the trigg er parameters to the correct
settings for a single-sho t acquisition (or single-sequence acquisition).
(See page 6 0.)
USB Flash Drive Port. You can use a USB flash drive to store and recall
waveforms and setups, as well as upgrade the oscilloscope fi rmware and
install new features. (See page 105.)
Probe Support. You can use the standard probes or choose an optional
probe for a specific application. Appendix D provides information and
limitatio
ns. (Seepage169.)
Multilingual User In terface. On-screen menus and messages are in 11
languages. (See page 133.)
8 TDS3000C Series Oscilloscope User Manual
To Next Page
Loading...
Need help?
General
