PRE-OPERATING PREPARATIONS 17
4
Use a genuine engine oil or recommended
one (TCW3). Refer to your Distributor.
Will not recommend use of other two
stroke engine oil.
Do not mix different brands of oil.
Mixing different brands of oil, or different
types of oil even if the brand is the same,
may cause gelling, resulting in possible fil-
ter screen blockage. This could result in
serious engine damage because of
impaired lubrication performance.
Note
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
Add engine oil into fuel oil tank. The mixing
ratio with gasoline is 1 : 50 (one part oil
and 50 parts gasoline). Mix well by hand.
The mixing ratio during break-in running is
1 : 25.
Mixing Ratio
2. Recommended engine oil
Engine Oil : Gasoline
During break-in 1 : 25
After break-in 1 : 50
10L
(0.2:10)
(0.4:10)
(0.5:25)
(1:25)
2L 25L 30L
0.1L
0
0.2L
0.3L
0.4L
0.5L
0.6L
0.7L
0.8L
0.9L
1.0L
1.1L
1.2L
1:25
1:50
Fuel by Oil Mixing (1:25, 1:50)
Gasoline
Oil
MWX50D2_E.book Page 17 Thursday, August 18, 2011 5:29 PM
To Next Page
Loading...
Need help?
General
