126 CG-SVX17D-EN
Controls Interface
Te c h V i e w
TechView is the PC (laptop) based tool used for servicing Tracer CH530. Technicians that make any
chiller control modification or service any diagnostic with Tracer CH530 must use a laptop running
the software application “TechView.” TechView is a Trane application developed to minimize chiller
downtime and aid the technicians understanding of chiller operation and service requirements.
Note: Important: Performing any Tracer CH530 service functions should be done only by a
properly trained service technician. Please contact your local Trane service agency for
assistance with any service requirements.
TechView software is available via Trane.com.
(http://www.trane.com/Commercial/DesignAnalysis/TechView.aspx)
This download site provides a user the TechView installation software and CH530 main processor
software that must be loaded onto your PC in order to service a CH530 main processor. The
TechView service tool is used to load software into the Tracer CH530 main processor.
Minimum PC requirements to install and operate TechView
• Microsoft Windows XP Professional, Windows Vista Business or Windows 7 Enterprise
operating system
• Internet Explorer 6.0 or higher
To Next Page
Loading...
Need help?
General