136 CG-SVX17D-EN
Controls Interface
Configuration View
This view is under the CH530 tab and displays the active configuration and allows you to make
changes to the unit configuration.
Configuration View allows you to define the chiller's components, ratings, and configuration
settings. These are all values that determine the required installed devices, and how the chiller
application is run in the main processor. For example, a user may set an option to be installed with
Configuration View, which will require devices to be bound using Binding View. And when the main
processor runs the chiller application, the appropriate steps are taken to monitor required inputs
and control necessary outputs.
Any changes made in the Configuration View, on any of the tabs, will modify the chiller
configuration when you click on the Load Configuration button (located at the base of the window).
The Load Configuration button uploads the new configuration settings into the main processor.
Selecting the Undo All button will undo any configuration setting changes made during the present
TechView connection and since the last time the Load Configuration button was selected.
Figure 88. Configuration View - CH530 Tab
To Next Page
Loading...
Need help?
General