EasyManuals Logo

Triumph Speed Twin 2019 User Manual

Triumph Speed Twin 2019
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #122 background imageLoading...
Page #122 background image
Maintenance and Adjustment
122
To adjust the rear brake fluid level:
Release the reservoir from the
frame without detaching the
connecting hose.
Remove the cap noting the position
of the sealing diaphragm.
Fill the reservoir to the upper level
line using new DOT 4 from a sealed
container.
Reinstall the reservoir cap making
sure that the diaphragm seal is
correctly positioned between the
cap and the reservoir body.
Reinstall the reservoir to the frame
by tightening the original fastener
to 44 lbf in (5 Nm).
Re-install the right hand side panel.
Brake Light Switches
Warning
Riding the motorcycle with defective
brake lights is illegal and dangerous.
An accident causing injury to the rider
and other road users may result from
use of a motorcycle with defective
brake lights.
The brake light is activated
independently by either the front or
rear brake. If, with the ignition in the ON
position, the brake light does not work
when the front brake lever is pulled
or the rear brake pedal is pressed,
have your authorized Triumph dealer
investigate and rectify the fault.
Mirrors
Warning
Operation of the motorcycle with
incorrectly adjusted mirrors is
dangerous.
Operation of the motorcycle with
incorrectly adjusted mirrors will result
in loss of vision to the rear of the
motorcycle. It is dangerous to ride a
motorcycle without sufficient rearward
vision.
Always adjust the mirrors to provide
sufficient rearward vision before riding
the motorcycle.
Warning
Never attempt to clean or adjust
mirrors while riding the motorcycle.
Removal of the rider’s hands from the
handlebars while riding the motorcycle
will diminish the ability of the rider to
maintain control of the motorcycle.
Attempting to clean or adjust mirrors
while riding the motorcycle may result
in loss of control of the motorcycle
and an accident.
Only attempt to clean or adjust the
mirrors while stationary.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Speed Twin 2019 and is the answer not in the manual?

Triumph Speed Twin 2019 Specifications

General IconGeneral
Displacement1200 cc
Compression Ratio11.0:1
Fuel SystemMultipoint sequential electronic fuel injection
ClutchWet, multi-plate assist clutch
Gearbox6-speed
FrameTubular steel cradle
Front Tire120/70 ZR17
Rear Tire160/60 ZR17
Seat Height807 mm
Dry Weight196 kg
Wet Weight216 kg
Fuel Tank Capacity14.5 liters
Engine TypeLiquid-cooled, 8-valve, SOHC, 270° crank angle parallel twin
Bore x Stroke97.6 mm x 80 mm
Max Torque112 Nm @ 4, 950 rpm
ExhaustStainless steel 2 into 2 exhaust system with twin silencers
Final DriveChain
Front Suspension120mm travel
Rear SuspensionTwin shocks, adjustable preload, 120mm rear wheel travel
Front BrakesABS
Rear BrakesSingle 220mm disc, Nissin 2-piston floating caliper, ABS
Front WheelCast aluminium
Rear WheelCast aluminum
Wheelbase1, 410mm
Max Power97 PS / 96 bhp (71.5 kW) @ 6, 750 rpm

Related product manuals