Triumph Speed Twin 2019 User Manual

Specifications - Street Twin
175
Specifications - Street Twin
Dimensions, Weights and Performance
A list of model specific dimensions, weights and performance figures is available
from your authorized Triumph dealer, or on the Internet at www. triumph. co. uk.
Payload Street Twin
Maximum Payload 463 lb (210 kg)
Engine Street Twin
Type
Liquid cooled parallel twin, 270° firing
angle
Displacement 900 cc
Bore x Stroke 3.33 x 3.15 in (84.6 x 80 mm)
Compression Ratio 11:1
Cylinder Numbering Left to right
Cylinder Sequence 1-2
Firing Order 1-2
Starting System Electric starter
Lubrication Street Twin
Lubrication System Wet sump
Engine Oil Capacities:
Dry Fill 1 US gallon (3.8 liters)
Oil/Filter Change 0.9 US gallons (3.4 liters)
Oil Change Only 0.85 US gallons (3.2 liters)
Cooling Street Twin
Coolant Type Triumph HD4X Hybrid OAT
Water/Coolant Ratio 50/50 (pre-mixed as supplied by Triumph)
Coolant Capacity 1.518 liters
Thermostat Opens 190°F (88°C) +/- 35°F (2°C)
Fuel System Street Twin
Type Electronic fuel injection
Fuel Pump Submerged electronic
Fuel Pressure (nominal) 50.8 lb/in² (3.5 bar)

Triumph Speed Twin 2019 Specifications

General

Displacement	1200 cc
Compression Ratio	11.0:1
Fuel System	Multipoint sequential electronic fuel injection
Clutch	Wet, multi-plate assist clutch
Gearbox	6-speed
Frame	Tubular steel cradle
Front Tire	120/70 ZR17
Rear Tire	160/60 ZR17
Seat Height	807 mm
Dry Weight	196 kg
Wet Weight	216 kg
Fuel Tank Capacity	14.5 liters
Engine Type	Liquid-cooled, 8-valve, SOHC, 270° crank angle parallel twin
Bore x Stroke	97.6 mm x 80 mm
Max Torque	112 Nm @ 4, 950 rpm
Exhaust	Stainless steel 2 into 2 exhaust system with twin silencers
Final Drive	Chain
Front Suspension	120mm travel
Rear Suspension	Twin shocks, adjustable preload, 120mm rear wheel travel
Front Brakes	ABS
Rear Brakes	Single 220mm disc, Nissin 2-piston floating caliper, ABS
Front Wheel	Cast aluminium
Rear Wheel	Cast aluminum
Wheelbase	1, 410mm
Max Power	97 PS / 96 bhp (71.5 kW) @ 6, 750 rpm