EasyManuals Logo

Triumph Speed Twin 2019 User Manual

Triumph Speed Twin 2019
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
General Information
54
Tire Pressures
Warning
The tire pressure monitoring system
is not to be used as a tire pressure
gauge when adjusting the tire
pressures. For correct tire pressures,
always check the tire pressures when
the tires are cold using an accurate
tire pressure gauge (see page 175).
Use of the TPMS system to set
inflation pressures may lead to
incorrect tire pressures leading to loss
of motorcycle control and an accident.
The tire pressures shown on your
instrument panel indicate the actual
tire pressure at the time of selecting
the display. This may differ from the
inflation pressure set when the tires
are cold because tires become warmer
during riding, causing the air in the tire
to expand and the inflation pressure to
increase. The cold inflation pressures
specified by Triumph take account of
this.
Only adjust tire pressures when the
tires are cold using an accurate tire
pressure gauge (see page 133). Do not
use the tire pressure display on the
instruments.
Replacement Tires
When replacing tyres, always have an
authorized Triumph dealer fit your tyres
and make sure they are aware that
tyre pressure sensors are fitted to the
wheels.
Ignition Switch/Steering Lock
Warning
For reasons of security and safety,
always turn the ignition to the OFF
or PARK position and remove the
key when leaving the motorcycle
unattended.
Any unauthorized use of the
motorcycle may cause injury to
the user, other road users and
pedestrians and may also cause
damage to the motorcycle.
Warning
With the key in the LOCK or P position
the steering will become locked.
Never turn the key to the LOCK or
P positions while the motorcycle is
moving as this will cause the steering
to lock. Locked steering will cause loss
of motorcycle control and an accident.
P
U
S
H
P
O
F
F
O
N
3
4
5
1
2
1. Ignition switch/Steering lock
2. ON position
3. OFF position
4. LOCK position
5. PARK position

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Speed Twin 2019 and is the answer not in the manual?

Triumph Speed Twin 2019 Specifications

General IconGeneral
Displacement1200 cc
Compression Ratio11.0:1
Fuel SystemMultipoint sequential electronic fuel injection
ClutchWet, multi-plate assist clutch
Gearbox6-speed
FrameTubular steel cradle
Front Tire120/70 ZR17
Rear Tire160/60 ZR17
Seat Height807 mm
Dry Weight196 kg
Wet Weight216 kg
Fuel Tank Capacity14.5 liters
Engine TypeLiquid-cooled, 8-valve, SOHC, 270° crank angle parallel twin
Bore x Stroke97.6 mm x 80 mm
Max Torque112 Nm @ 4, 950 rpm
ExhaustStainless steel 2 into 2 exhaust system with twin silencers
Final DriveChain
Front Suspension120mm travel
Rear SuspensionTwin shocks, adjustable preload, 120mm rear wheel travel
Front BrakesABS
Rear BrakesSingle 220mm disc, Nissin 2-piston floating caliper, ABS
Front WheelCast aluminium
Rear WheelCast aluminum
Wheelbase1, 410mm
Max Power97 PS / 96 bhp (71.5 kW) @ 6, 750 rpm

Related product manuals