Triumph Thruxton Handbook

104
Maintenance and Adjustment
Cleaning of Exhaust System
All parts of the exhaust system of your
motorcycle must be cleaned regularly to
avoid a deterioration of its appearance. These
instructions can be applied to chrome,
brushed stainless steel and carbon fibre
components alike.
Note:
• The exhaust system must be cool
before washing to prevent water
spotting.
Washing
• Prepare a mixture of cold water and
mild automotive cleaner. Do not use
a high alkaline content soap as
commonly found at commercial car
washes because it leaves a residue.
• Wash the exhaust system with a soft
cloth. Do not use an abrasive
scouring pad or steel wool. They will
damage the finish.
• Rinse the exhaust system
thoroughly.
• Ensure no soap or water enters the
exhausts.
Drying
• Dry the exhaust system completely
with a soft cloth. Do not run the
engine to dry the system or spotting
will occur.
Protecting
• When the exhaust system is dry, rub
'Motorex 645 Clean and Protect'
into the surface.
• It is recommended that regular
protection be applied to the system
as this will both protect and enhance
the system's appearance.
Caution
The use of products containing silicone will
cause discolouration of the chrome and
must not be used. Similarly, the use of
abrasive cleaners and polishes will damage
the system and must not be used.

Triumph Thruxton Specifications

General

Displacement	1200 cc
Transmission	6-speed
Bore x Stroke	97.6 mm x 80 mm
Max Torque	112 Nm @ 4, 950 rpm
Fuel System	Fuel injection
Final Drive	Chain
Clutch	Wet, multi-plate
Frame	Tubular steel
Rear Suspension	Twin shocks
Front Brakes	Dual 310mm discs, 2-piston calipers
Rear Brakes	Single 220mm disc, 2-piston caliper
Front Wheel	17 x 3.5 in
Rear Wheel	17-inch
Length	2100 mm (82.7 in)
Width (Handlebars)	745 mm (29.3 in)
Height	1, 030mm
Seat Height	810mm
Wheelbase	1, 415mm
Rake	22.8 º
Fuel Capacity	14.5 liters
Weight (Dry)	203kg
Weight (Wet)	223kg
Exhaust	2-into-2