To Next Page

To Previous Page

 GETKEY( )

Description

This command is used to get the status of the PAUSE and FEED keys. This command waits until either

key is pressed, whereupon 0 is returned if PAUSE key is pressed and 1 is returned if FEED key is

pressed.

Syntax

GETKEY()

Model

PAUSE

FEED

TTP-2410M/TTP-346M Plus/TTP-248M/TTP-246M Plus/

TTP-344M Plus/TTP-384M /TTP-644M/TTP246M/344M/

TTP-244/TTP-244 Plus/TTP-243/TTP-342/TTP-243 PLUS/

TTP-342 PLUS/TTP-342M/TTP-244ME/TTP-342M PLUS/

TTP-244ME PLUS

TDP-643 PLUS/TDP-643R PLUS/TTP-245/343/TDP-245/

TTP-245C/343C/244CE

Example

Sample code

DOWNLOAD "DEMO4.BAS"

SIZE 4,3

GAP 0,0

CLS

:START

A=GETKEY()

IF A=0 THEN GOTO PAUSEB

IF A=1 THEN GOTO FEEDB

:PAUSEB

CLS

TEXT 50,10,"4",0,1,1,"PAUSE key is pressed !"

PRINT 1

GOTO START

:FEEDB

CLS

TEXT 50,10,"4",0,1,1,"FEED key is pressed !"

PRINT 1

EOP

TSC M23 Programming Manual

Other manuals for TSC M23