TSC M23 Programming Manual

TSC AUTO ID Technology Co., Ltd. 13 Copyright 2013 All Rights Reserved.
 REFERENCE
Description
This command defines the reference point of the label. The reference (origin) point varies with the
print direction, as shown:
Syntax
REFERENCE x, y
Parameter
Description
x
Horizontal coordinate (in dots)
y
Vertical coordinate (in dots)
Note:
200 DPI: 1 mm = 8 dots
300 DPI: 1 mm = 12 dots
Example
Sample code
REFERENCE 10,10
See Also
DIRECTION

TSC M23 Specifications

General

Brand	TSC
Model	M23
Category	Printer
Language	English