TSC AUTO ID Technology Co., Ltd. 203 Copyright 2013 All Rights Reserved.
SET USBHOST KEYBOARD/SCANNER
Description
This command can set the USB host for the usage of USB keyboard or scanner
Syntax
SET USBHOST KAYBOARD/SCANNER
Note:
This command has been supported since V6.95 EZ and later firmware.
This command is for TTP-2410M series, ME240 series, TTP-225 series and TDP-225 series
which has USB HOST connector.
Example
Sample code
SET USBHOST KEYBOARD
or
SET USBHOST SCANNER
To Next Page
Loading...
Need help?
General
