To Next Page

To Previous Page

 EOJ

Description

Let the printer wait until process of commands (before EOJ) be finished then go on the next command.

Syntax

EOJ

Note:

This command has been supported since V6.39 EZ and later firmware.

Example

Sample Code

SIZE 4,0.2

GAP 0,0

DIRECTION 1

CLS

TEXT 10,10,"3",0,1,1,"Two labels are printed without stop."

PRINT 1

SIZE 4,0.2

GAP 0,0

CLS

TEXT 10,10,"3",0,1,1,"Printer stops before next printing."

PRINT 1

EOJ

PRINT 1

Result

Paper feed direction

without stop

TSC M23 Programming Manual

Other manuals for TSC M23