TSC M23 Programming Manual

Update History
Date
Content
Editor
2007/07/13
Revise some typos
Phil
2007/12/25
Revise FREAD$() example
Camille
2008/04/10
Add update history list
Camille
2009/01/17
Add GAPDETECT command
Ken
2009/05/18
Add CIRCLE command
Phil
2009/06/24
Add RSS command
Phil
2010/07/06
Revise bar command section
Camille
2010/10/25
Revise some sections
Camille
2011/01/06
Add CODE 11 barcode
Ernest
2011/01/06
Add AZTEC barcode
Ernest
2011/01/06
Revise sensor intension table in SET GAP command
Ernest
2011/01/10
Add BLINEDETECT command
Ernest
2011/01/10
Add AUTODETECT command
Ernest
2011/01/10
Add BASIC function FORMAT$()
Ernest
2011/01/10
Add BASIC function NOW$()
Ernest
2011/01/10
Add BASIC function TRIM$()
Ernest
2011/01/10
Add BASIC function LTRIM$()
Ernest
2011/01/10
Add BASIC function RTRIM$()
Ernest
2010/01/10
Add BASIC function STRCOMP()
Ernest
2010/01/10
Add BASIC function INSTR()
Ernest
2011/01/25
Modify TSC address
Camille
2011/03/04
Revise, TTP-248M doesn't support mirror function
Ernest
2011/03/04
Add sensor range of TTP-225/ TDP-225 in command SET GAP
Ernest
2011/12/09
Add some command spec in RSS barcode.
Ernest
2012/11/20
Add command SET USBHOST KEYBOARD/SCANNER
Ernest
2012/11/20
Revise STRCOMP() example
Ernest
2012/11/20
Revise TRIM$(), LTRIM$(), RTRIM$() example.
Ernest
2012/11/20
Add <ESC>!P command.
Ernest
2012/11/20
Add <ESC>!O command.
Ernest
2012/11/20
Revise OUT command.
Ernest
2012/11/20
Add SET BLINE command.
Ernest
2012/11/20
Add ELLIPSE command.
Ernest
2012/11/20
Add SET RIBBONEND command.
Ernest
2012/11/20
Add SET ENCODER command.
Ernest
2012/11/21
Revise TEXT command.
Ernest
2012/11/21
Revise speed table of SPEED command.
Ernest
2012/11/21
Revise AZTEC command.
Ernest
2012/11/21
Add BLOCK command.
Ernest
2012/11/21
Add PUT command.
Ernest
2012/11/21
Add GET command.
Ernest
2012/11/21
Add INP() command.
Ernest
2012/11/22
Revise PUTBMP command. Support grayscale printing in direct thermal printing.
Ernest
2012/11/22
Revise BARCODE command. New support barcode TELEPEN, TELEPENN, PLANET, CODE49, DPI, DPL.
Ernest
2012/11/23
Add TLC39 barcode.
Ernest
2012/11/23
Add CODABLOCK command (F mode only).
Ernest
2012/11/23
Add SELFTEST PATTERN command.
Ernest
2012/11/23
Revise the supported CODEPAGE table and example.
Ernest
2012/11/23
Add global variable NOW.
Ernest
2012/11/26
Add DATEADD() command.
Ernest
2012/11/26
Add SET AUTORUN command.
Ernest
2012/11/26
Add LOC() command.
Ernest
2012/11/26
Add NOW$() command.
Ernest
2012/11/26
Revise SET RIBBON command.
Ernest
2012/11/26
Revise SET COUNTER command.
Ernest
2012/11/26
Add <ESC>!C command.
Ernest
2012/11/26
Add <ESC>!Q command.
Ernest
2012/11/26
Add <ESC>!S command.
Ernest
2012/11/26
Add OUTR command.
Ernest
2012/11/26
Add <ESC>!D command.
Ernest
2012/11/26
Add ~!E command.
Ernest
2012/11/27
Add LOB() command.
Ernest

TSC M23 Specifications

General

Brand	TSC
Model	M23
Category	Printer
Language	English