Ubee UBC1303 User Manual

Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017 14
2 Installing the UBC1303AB00
Use the information in this chapter to set up and connect the UBC1303AB00, connect
additional devices, and troubleshoot the installation.
See the following topics:
 Setting Up and Connecting the UBC1303AB00 on page 14
 Connecting Devices to the Network on page 16
 Troubleshooting the Installation on page 18
2.1 Setting Up and Connecting the UBC1303AB00
Use the following instructions to set up and connect the UBC1303AB00. When the device
is set up and connected, refer to Accessing the Web User Interface Locally on page 18 to
configure the device.
Important: You must contact your service provider to enable Internet access, wireless
networking, and telephony (voice). In particular, voice service requires additional steps
including canceling the previous telephone provider service, porting the telephone
number, and other tasks to minimize downtime during the transition.
To set up the device:
1. Remove the contents from the device packaging.
2. Place the UBC1303AB00 in the best location to connect to other devices, such as PCs
or gaming consoles.
 Place the UBC1303AB00 Advanced Wireless Voice Gateway and wireless clients
in open areas far away from transformers, heavy-duty motors, microwave ovens,
refrigerators, fluorescent lights, and other manufacturing equipment. These items
can impact wireless signals. A wireless signal can become weaker after it has
passed through metal, concrete, brick, walls, or floors. For additional information
on wireless signals, see Deploying and Troubleshooting the Wireless Network on
page 85.
 Place the device in a location that has an operating temperature of 0˚C to ~ 40˚C.
Refer to Understanding Safety and Regulatory Information on page 1 for more
safety information.

Ubee UBC1303 Specifications

General

Brand	Ubee
Model	UBC1303
Category	Gateway
Language	English