Ubee Interactive Understanding the Device Label
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017 13
1.8 Understanding the Device Label
The following is an example of the housing label for the UBC1303AB00. Descriptions are
provided in the table below.
Label Description
Model No. Displays the model number of the device.
Ubee Part No. Displays the full Ubee part number of the device.
S/N Displays the unique manufacturer serial number of the device.
CM MAC Displays the MAC address of the cable interface of the device.
GUI username
Displays the user name to be entered when accessing the Web user interface for the
device.
GUI password
Displays the random password to be entered when accessing the Web user interface for
the device.
2.4G SSID
Displays the SSID (service set identifier), or wireless network name, for the 2.4GHz
wireless band. See Understanding Default Values and Logins on page 11 for more
information.
2.4G WPA2 key
Displays the unique WPA pre-shared key for the 2.4GHz band of the device. It is also
called the network key, the wireless key, or the wireless password.
5G SSID
The second SSID displays the SSID (service set identifier), or wireless network name, for
the 5GHz wireless band. See Understanding Default Values and Logins on page 11 for more
information.
5G WPA2 key
Displays the unique WPA pre-shared key for the 5GHz band of the device. It is also called
the network key, the wireless key, or the wireless password.
H/W Version Displays the internal version number that identifies the hardware design.
Made in Displays the country in which the device was assembled.
To Next Page
Loading...
Need help?
General
