Ubee UBC1303 User Manual

Ubee Interactive Understanding Default Values and Logins
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017 11
 RTCP XR
 Ring Voltage: 270 VAC, pk-pk (tip ring), Line Voltage Onhook: -48 Volts, Loop
Current: 20mA / 41mA, Ring Capability: 2K ft., 5REN, Hook State: Signaling Loop
Start
Device Management
 Supports IEEE 802.11e Wi-Fi Multimedia (WMM)
 DOCSIS, Web-Based, and XML Configuration
 Telnet console
 Serial console (optional)
 Firmware upgrade via TFTP
 Configuration backup and restore
 WiFi radar
 Spectrum analyzer
 SNMP v1, v2c, v3 support
 TR-069 capable
Physical and Environmental
 Dimensions when positioned vertically: 228mm (H) x 198mm (D) x 50mm (W)
 Weight: 850g
 External Power Supply: 12VDC, 3.5A
 Operating Temperature: 0°C ~ 45°C
 Storage Temperature: -20°C ~ 70°C
 Humidity: 5~95% (non-condensing)
1.7 Understanding Default Values and Logins
The UBC1303AB00 is pre-configured with the default parameters for your Service
Provider.
Local Port Address: 192.168.100.1

Ubee UBC1303 Specifications

General

Brand	Ubee
Model	UBC1303
Category	Gateway
Language	English