Ubee UBC1303 User Manual

Ubee Interactive Using the Diagnostics Option
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017 87
1. Choose Traceroute from the Utility drop-down menu.
2. Enter a target IP address or URL name of which to trace a route.
3. Enter new parameter values or accept the default values.
4. Click Start Test. Field descriptions are listed below the screen example.
6.7.2 Using the Home Topology Option
Use the Home Topology option to view the current wireless network connections for the
UBC1303AB00 Advanced Wireless Voice Gateway.
In the following screen example:
Label Description
Utility Provides a drop-down menu to choose Ping or Traceroute.
Traceroute Parameters
Target
Defines the specific IP address or domain (for example, google.com) to which you want to
trace a route.
Max Hops
Defines the maximum number of hops. Hops are the number of routers the traceroute
traverses. Default is 255.
Data Size Defines the data size to send for the traceroute operation. Default is 32 bytes.
Reset Defaults Resets the Traceroute Parameters to the default values.
Start Test
Clear Results
Defines what action to take:
 Start Test begins the traceroute.
 Clear Results deletes previous test results in the Results table.
Results Displays the results of the trace.

Ubee UBC1303 Specifications

General

Brand	Ubee
Model	UBC1303
Category	Gateway
Language	English