Ubee UBC1303 User Manual

Ubee Interactive Using the Diagnostics Option
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017 86
2. Enter a target IP address or URL name to ping in the space provided.
3. Enter new parameters or accept the default values.
4. Click Start Test. Field description follow the example below.
6.7.1.2 Using the Traceroute Option
The Traceroute utility determines the IP addresses of hosts in the network path. By
checking the Resolve Host names box, Traceroute tries to find which name matches the
address. Some hosts have no names, and might still be shown as IP addresses, even if
this option is active.
Label Description
Utility Provides a drop-down menu to choose Ping or Traceroute.
Ping Test Parameters
Target Enter the IP address or URL name to which you want to send a ping.
Ping Size Defines the packet size (bytes of data) to send for the ping operation. The default is 64.
No. of Pings Defines the number of ping commands to send to the ping target. Default is 3 pings.
Ping Interval Defines the interval between ping operations in milliseconds.
Reset Defaults Resets the Ping Test Parameters to the default values when pressed.
Start Test
Abort Test
Clear Results
Defines what action to take:
 Start Test begins the ping.
 Abort Test stops the ping.
 Clear Results deletes the previous test results in the Results table.
Results Displays the results of the ping test.

Ubee UBC1303 Specifications

General

Brand	Ubee
Model	UBC1303
Category	Gateway
Language	English