Making calls with multiple lines 121
Lines with hot or warm line function
Your administrator can configure a hot or warm line for the primary and second-
ary line.
The function is activated when on
• The Primary line
you pick up the phone’s handset or press the line or loudspeaker key
• the secondary line
you press the line key.
A number specified by you is dialled with a hot line immediately and with a warm
line after a specific time.
Examples:
• The phone in the lift immediately dials the reception number.
• The phone at a patient’s bed dials the ward number e.g. after a minute if no
other number is dialled.
Entering a number for the hot and warm line function
Specify which number should be dialled when the hot or warm line function is
activated.
z
You can also configure this setting via the web interface ïƒ Page 197.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the line you want.
Select and confirm the option shown.
j Enter and confirm the destination.
Select and confirm the option shown.
To Next Page
General
