Unify OpenStage 15 User Manual

136 Privacy/security
Deactivating the ringer temporarily for incoming calls
and reactivating it
If you are disturbed on an important call by the phone ringing, for example, you
can deactivate the ringer temporarily and then activate it again.
) Press the key briefly. The ringer is deactivated.
) Now press the key again briefly. The ringer is reactivated.
Do not disturb
If "Do not disturb" is activated, your telephone will not ring. The caller hears the
busy tone or an announcement that the called party cannot accept any calls at
the moment.
Do not disturb can be activated and deactivated by means of a specially pro-
grammed key or also from the idle menu.
Prerequisite: A programmable key is assigned the function "Do Not Disturb"
(see
 Page 69). "Do not disturb" must be activated ( Page 137).
Enabling do not disturb via a key
S Press the programmed "DoNotDisturb" key.
R Press the illuminated key once more to deactivate the "Do not disturb" function.
or
Enabling do not disturb via the idle menu
Select and confirm the option shown in the idle menu. The "Do not disturb" icon
appears
 Page 24.
or.
Select and confirm the option shown. The do not disturb icon is deleted.
On multi-line telephones ( Page 13) you can only activate the "Do not
disturb" function for your primary line.
You can also use the key to activate the "Do not disturb" function during a
call or deactivate it when an incoming call is being signalled.
Do not disturb on f
Do not disturb off f

Unify OpenStage 15 Specifications

General

Brand	Unify
Model	OpenStage 15
Category	Telephone
Language	English