Unify OpenStage 15 User Manual

Enhanced phone functions 77
Enhanced phone functions
Incoming calls
Deflecting a call
Using call deflection
Prerequisite: An incoming call is displayed or signalled. "Deflect" must be al-
lowed.
Select and confirm the option shown.
If a destination phone number is stored ( Page 77), you can select and confirm
it. The call is deflected.
or If you did not set a phone number when programming call deflection, you are
now prompted to enter a destination phone number for call deflection.
j Enter and confirm the destination phone number. The call is deflected.
Permitting call deflection
z
You can also configure this setting via the web interface  Page 197. "Deflect"
must be authorised by administrator.
N Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Confirm.
Select and confirm the option shown.
j Enter and confirm the phone number to which the station should be deflected.
Deflect? m
089008844 l
Settings
User
Configuration
Incoming calls
Deflecting?
Allow deflection = No f
Yes l
Default destination = f
Entering a destination phone number is not mandatory when call deflec-
tion is active. If you want to deflect an incoming call, you are prompted to
enter a destination phone number if there is none stored.

Unify OpenStage 15 Specifications

General

Brand	Unify
Model	OpenStage 15
Category	Telephone
Language	English