Unify OpenStage 15 User Manual

Getting to know your OpenStage phone 19
Programmable function keys
Your OpenStage 15 has eight illuminated keys to which you can assign functions or numbers.
Depending on how they are programmed, you can use the keys as:
• Function key  Page 69
• Selected dialling
 Page 71
Each key can be programmed with one function.
Press the key briefly to activate the programmed function or dial the stored number.
If you hold the key down, you will be prompted as to whether you want to program this function key.
Your OpenStage is delivered with label strips. Write functions or names in the white fields on the
label strips.
The status of a function is shown by the LED on the corresponding function key.
Meaning of LED displays on function keys
Increase the number of programmable function keys by connecting a
OpenStage
Key Module 15  Page 17.
If the prompt is not displayed or a programmed function is not executed, then you can only
launch key programming via the user menu
 Page 70 (ask your administrator about the
current setting).
Line and DDS keys can only be programmed by administrator via the service menu.
LED Meaning of function key
S Off The function is deactivated.
T
Flash-
ing
1
1 In this manual, flashing sensor keys are identified by this icon, regardless of the flashing interval. The flashing interval
represents different statuses, which are described in detail in the corresponding sections of the manual.
Indicates the function status.
R On The function is activated.
Some of the programmable keys on multi-line phones can be set up as trunk keys
 Page 20.
Peter Fox
Destinations?

Unify OpenStage 15 Specifications

General

Brand	Unify
Model	OpenStage 15
Category	Telephone
Language	English