EasyManuals Logo
Home>Unify>Handsets>OpenStage WL3

Unify OpenStage WL3 User Manual

Unify OpenStage WL3
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10 Safety and Regulatory Instructions
•60 % Chlorhexidine 0.5 mg/ml
Acetone can be damaging to the plastic casing of the handset and should not be used.
Battery
Do not immerse the battery into water. This could short-circuit and damage the battery.
Do not expose a battery to an open flame. This could cause the battery to explode.
Do not allow the metal contacts on the battery to touch another metal object. This could short-
circuit and damage the battery.
Do not leave a battery where it could be subjected to extremely high temperatures, such as
inside a car on a hot day.
Use the Desktop Charger or the wall-mounted Charging Rack for charging. Charge the battery
for at least one hour the first time you use the battery. Note that the wall-mounted Battery Pack
Charger has to be used if the battery alone is to be charged.
Do not charge a battery when the ambient room temperature is above 40 °C or below 5 °C
(above 104
°F or below 41 °F).
Do not attempt to take a battery apart.
Do not disconnect the battery unless it needs to be replaced.
Power off the handset before removing the battery.
Battery Disposal
Defective batteries must be returned to a collection point for chemical waste disposal.

Table of Contents

Other manuals for Unify OpenStage WL3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Unify OpenStage WL3 and is the answer not in the manual?

Unify OpenStage WL3 Specifications

General IconGeneral
BrandUnify
ModelOpenStage WL3
CategoryHandsets
LanguageEnglish