Unify OpenStage WL3 User Manual

Menu Operation 43
5. Press “View”.
6. Press “More”.
7. Select “Call no. in text”
1
.
8. Select number from the list.
9. Press “Call”
Save Number
1. Press “Menu”.
2. Select “Messaging” in the menu.
3. Select “Inbox” to view the message list.
4. Select a message by using Up and Down on the Navigation key.
5. Press “View”.
6. Press “More”.
7. Select “Save number”.
8. Select “Work Number”/“Mobile number”/“Other number”.
9. Press “Add”.
10.Enter name. See "Alphanumeric Keys" on page 14.
11.Press “OK”.
12.Press “Save”. The number is stored in the contact list.
Write New Messages
1. Press “Menu”.
2. Select “Messaging” to view the message list.
3. Select “Write new message”.
4. Enter text. See "Alphanumeric Keys" on page 14.
5. Press “Send”.
A message can be saved and sent later by pressing the Soft Key “Back” and select “Yes”. The
message is stored under Unsent messages. See
"Unsent Messages" on page 43.
6. Enter number, or press middle Soft Key to get the number from contact list.
7. Press “Send”.
Unsent Messages
1. Press “Menu”.
2. Select “Messaging” to view the message list.
3. Select “Unsent” to view the list.
4. Select message to edit/send.
5. Select “Edit”, edit text and/or just select “Send”.
Delete/Delete All
1. Press “Menu”.
2. Select “Messaging” to view the message list.
3. Select “Unsent”
4. Select message in the list.
5. Select “More”.
6. Select “Delete” or “Delete all”.
7. Select “Yes” if the unsent message(s) should be deleted.
1. Visible if the number consists of minimum 3 digits.

Unify OpenStage WL3 Specifications

General

Brand	Unify
Model	OpenStage WL3
Category	Handsets
Language	English