24 Calling
Outgoing Call
Pre-Dial
Enter the number and press or the soft key “Call” to get the line. The number is shown on the
display while dialing. If needed, press “Clear” to erase the number. By using the Navigation key, it
is possible to step and add/delete a digit in a number.
An international number can be dialed from the handset by entering a + character followed by the
country code and local number. To enter the + character, long press the 0 key until the character
is shown in the display.
Dial Using a Pre-Programmed Key/Button
Some keys and buttons can be programmed with a number, as described in "Short Cuts" on page
45.
Press the pre-programmed key/button to dial the number. The call is automatically connected.
Dial a Number from the Call List
1. Press “Menu”.
2. Select “Calls” .
3. Select “Call list”.
4. Select a number.
5. Press or the soft key “Call” to dial. The number can be edited before the call is dialed. Press
“More” and select “Edit number”. The 25 last received, dialed, or missed calls are stored in a
call list. See
"Calls" on page 67.
Dial the Sender of a Message
1
It is possible to call the sender of a message stored in the message list.
1. Open the menu by pressing the “Menu” soft key.
2. Select “Messaging” .
3. Select “Inbox”.
4. Select message in the message list.
5. Press “View”.
6. Press “More”.
7. Select “Call sender”.
Dial a Number from the Local Phonebook
1. Open the menu by pressing the “Menu” soft key.
2. Select “Contacts” .
The + character cannot be entered and international numbers cannot de dialed this way, if
the 0 key has been configured as a hot key, see "Define Hot Keys" on page 46.
It is also possible to dial a number from the Call list by pressing the Call key , selecting a
number from the list, and then pressing “Call” or the Call key .
1. Applicable to WL3 Messaging and WL3 Plus only.
To Next Page
Loading...
Need help?
General