56 Menu Operation
Connections
Headset
To achieve optimal audio quality with the different headset types, it is recommended to select the
corresponding headset profile.
The default setting is microphone on a boom, that is, the audio is optimized for using a headset
with microphone on a boom. The headset profile can be changed in the menu as follows:
1. Enter the menu by pressing the “Menu” soft key, or Confirmation on the Navigation key.
2. Select “Connections” .
3. Select “Headset” with the soft-key Select or Confirmation on the Navigation key.
4. Select the corresponding headset profile from list, that is, “Mic on boom”, “Mic on cable”, “Hear-
ing protection”, or “Customized headset profile”
1
.
5. Press “Select”, or the confirmation button on the Navigation key.
If the preconfigured headset profiles do not match the headset in use, or the audio performance
is bad, an own headset profile can be configured. If an own profile is configured in the Device Man-
ager, the profile is selectable in the handset menu. Please contact your administrator to get sup-
port.
Network
1. Enter the menu by pressing the “Menu” soft key.
2. Select “Connections” in the menu.
3. Select “Network”.
4. Select network in the list. The handset restarts if the network is changed.
In Charger Action
You can determine actions to be performed when a handset is placed in the charger.
Switch the handset off
The handset can be switched off automatically when it is placed in the charger. When it is removed
from the charger, it switches on again. When the handset is switched off in the charger, the Owner
ID of the handset is shown. This simplifies the identification of the handset when, for example,
charging it together with other handsets.
1. Enter the menu by pressing the “Menu” soft key.
2. Select “Connections” in the menu.
3. Select “In charger”.
4. Select “Switch off”.
Turn the sound off
When the handset is placed in the charger, it will be muted. When the handset is removed from
the charger, the sound switches on again. When the handsets sound is off/muted in the charger,
the Owner ID of the handset is shown. This simplifies the identification of the handset when, for
example, charging it together with other handsets.
1. Available if the activated by Administrator.
To Next Page
Loading...
Need help?
General