64 Maintenance
Replace the Battery
If the standby time for the handset becomes too low, the battery should be replaced by a new one.
Please contact your system administrator or your supplier, for information about new batteries. At-
tach the battery as described in the illustration below. The battery is easy to replace. It is attached
inside the battery lid and is connected to the handset in such a way that no improper contact is
possible.
Figure 10 Easy replaceable battery, unlock the lid and remove the battery.
Attach the Hinge-type Clip
Attach the hinge-type belt clip as described in the illustration below.
Figure 11 Screw the hinge-type clip into position.
To Next Page
Loading...
Need help?
General