Unify OpenStage User Manual

c05.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
233
Nur für den internen Gebrauch Phone Parameters - User
Configuration
5.3.5 Keyset
5.3.5.1 Lines
The following parameters can be configured individually for each line handled by the phone. As
they are already described in the administrator chapter, only cross-references to the corre-
sponding section are given here.
Auto hide time
(sec.)
context-
menu-auto-
hide-time
Enumer-
ation
5=5;
10=10;
20=20;
30=30;
60=60;
120=120;
No auto
hide=0(context
menu will stay
open)
Default: 20,
OS40 US: 0
Timeout in seconds after
which the automatically
opened context menu will
disappear.
Relevant for OpenStage
40/60/80/41 and Open-
Scape DPIP 55G.
Available with firmware
version V2R1.
WBM Name See
Ring delay (seconds) Section 4.4.5.3, "Line"
Allow in overview Section 4.4.5.3, "Line"
Address Section 4.4.5.3, "Line"
Primary line
(read only)
Section 4.4.5.3, "Line"
Ring on/off
(read only)
Section 4.4.5.3, "Line"
Ringer file Section 4.11.1, "Distinctive Ringers per Keyset Lines"
Ringer/Pattern melody Section 4.11.1, "Distinctive Ringers per Keyset Lines"
Ringer/Pattern sequence Section 4.11.1, "Distinctive Ringers per Keyset Lines"
Selection order Section 4.4.5.3, "Line"
Hot/warm line Section 4.4.5.3, "Line" (Hot warm action)
Hot/warm destination As the hotline/warmline function is used in special scenarios only,
it is generally recommended not to use this option in MAA environ-
ments.
WBM Name Item name Type Values Description

Unify OpenStage Specifications

General

Brand	Unify
Model	OpenStage
Category	IP Phone
Language	English