Unify OpenStage User Manual

Phone Parameters - Provisioning Nur für den internen Gebrauch
A31003-S2000-R102-16-7620 02/2016
242 Provisioning Service, Developer’s Guide
c06.fm
Provisioning Service Related
6 Phone Parameters - Provisioning
In this section, those parameters are listed which are neither configurable via local/web inter-
face nor associated with parameters configurable via local/web interface.
6.1 Provisioning Service Related
6.2 Phone Specific, Hardware Related
Item name Type Values Description
dcmp-enable Boolean true/false
Default: false
Determines whether the phone shall
wait for contact-me messages from
the provisioning service, or poll the
provisioning service resp. a special
proxy for new configuration data. For
further information, please refer to
Section 1.3.2, "Firewall and NAT".
dcmp-url Text (URL) Complete URL, port
included
Default: NULL
Relevant if dcmp-enable is set to
true. The phone will poll this URL
for new configuration data.
dcmp-interval Integer 1 to 1440 (minutes) Relevant if dcmp-enable is set to
true. The phone will poll the provi-
sioning service resp. the proxy
periodically using this time interval.
Item name Type Values Description
related-
device-type
Text.
Max. 50
characters
OpenStage 15;
OpenStage 20E;
OpenStage 20;
OpenStage 40;
OpenStage 60;
OpenStage 80
Sent to the provisioning service to
identify the phone variant. Value is
read only. The value is built up dur-
ing phone start up, querying the
hardware variant.
OpenScape DPIP35 = OpenStage
20, OpenScape DPIP55 G = Open-
Stage 60

Unify OpenStage Specifications

General

Brand	Unify
Model	OpenStage
Category	IP Phone
Language	English