Unify OpenStage User Manual

c04.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
95
Nur für den internen Gebrauch Phone Parameters - Administration
Network
4.3.2 IPv4 Configuration
WBM Name Item name Type Values Description
LLDP-MED En-
abled
lldp-enabled Boolean true/false
Default: false
If enabled, a VLAN ID and
Quality of Service
parameters can be pro-
vided via LLDP-MED.
DHCP Enabled dhcp-enabled Boolean true/false
Default: true
Enable or disable DHCP
discovery.
DHCP lease
reuse
dhcp-reuse Boolean true/false
Default: false
If enabled, the phone will
keep its DHCP-based IP
address even if the lease
expires. To prevent ad-
dress conflicts, the phone
will send ARP requests in
5 second intervals. Addi-
tionally, it will send dis-
covery messages periodi-
cally to obtain a new
DHCP lease.
Available with OpenStage
V2R1.
IP address ipaddress IP
address
IP address
Default: NULL
IP address for the phone.
Only writable when not al-
ready defined by DHCP.
Subnet mask mask Subnet
mask
Subnet mask
Default: NULL
Network mask for the
phone.
Only writable when not al-
ready defined by DHCP.
Default route route IP
address
IP address
Default: NULL
Default network route for
the phone.
Only writable when not al-
ready defined by DHCP.
Route 1 IP ad-
dress
route1 IP
address
IP
address
Default: NULL
Specific route 1.
Route 1 gateway gw1 IP
address
IP address
Default: NULL
Gateway for specific
route 1.

Unify OpenStage Specifications

General

Brand	Unify
Model	OpenStage
Category	IP Phone
Language	English