Universal Robots UR e Series Manual

9. Removing the Energy Eater and fan assembly. Remove the four screws.
NOTICE
When assembling, remember to place the round spacers behind the Energy Eater
board.
4.4.2. Dismantling the OEM AC and DC Control Box
The OEM AC and DC version are special Control
Box units made for OEM installation in AC and
DC environments.
WARNING
Before replacing ANY components inside the Control Box, you MUST do a complete
shutdown.
Follow the first 3 steps in section Complete Rebooting Sequence
Service Manual 51 e-Series
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR e Series Specifications

General

Brand	Universal Robots
Model	UR e Series
Category	Robotics
Language	English