Uponor SmatrixMove User Manual

9.4 Factory reset
Factory reset sets all parameter values to default
settings.
NOTE!
Do not factory reset the thermostat if not
absolutely needed.
NOTE!
A factory reset removes the registration data
from the thermostat.
2
1
3
4
To factory reset an analogue thermostat:
1. Angle the thermostat from the bracket.
2. Remove it from the wall.
3. Gently press and hold the registration button on the
thermostat, release when the demand LED starts
flashing.
4. Change the Disable timer switch twice, regardless of
starting position.
5. The thermostat is now reset to factory default.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
58
UPONOR SMATRIX MOVE/MOVE PLUS · INSTALLATION AND OPERATION MANUAL

Uponor SmatrixMove Specifications

General

Brand	Uponor
Model	SmatrixMove
Category	Temperature Controller
Language	English