Utax P-4030 User Manual

8-11
Setup and Registration (System Menu) > System Menu
Secure Protocol
Host Name
LAN Interface
System/Network Network Setting Secure Protocol
Item Description
Secure Protocol SSL Select whether to use SSL for communication.
Value: Off, On
IPP Security Select the IPP security level. This setup is available when SSL is [On].
*1
Value: IPP/IPP over SSL, IPPoverSSL only
*1 The setting will be changed after restarting the device or the network for the machine.
HTTP Security Select the HTTP security level. This setup is available when SSL is [On].
*1
Value: HTTP/HTTPS, HTTPS Only
LDAP Security Select the type of encryption according to the type of security employed by the LDAP
server. This setup is available when SSL is [On].
*1
Value: Off, SSL/TLS, STARTTLS
SMTP Security Select the communication protocol according to the type of security employed by the
SMTP server. This setup is available when SSL is [On].
Value: Off, SSL/TLS, STARTTLS
POP3 Security 1 Select the communication protocol according to the type of security employed by the
POP3 server. This setup is available when POP3 is [On].
Value: Off, SSL/TLS, STARTTLS
POP3 Security 2
POP3 Security 3
System/Network Network Setting Host Name
Item Description
Host Name Check the host name of the machine. Host name can be changed from Embedded Web Server RX.
Changing Device Information (page 2-42)
System/Network Network Setting LAN Interface
Item Description
LAN Interface Specify the settings for the LAN interface to be used.
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000Base-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.

Utax P-4030 Specifications

General

Brand	Utax
Model	P-4030
Category	Printer
Language	English