8-38
Setup and Registration (System Menu) > System Menu
Adjust/Maint. (Adjustment/Maintenance)
Adjust printing quality and conduct machine maintenance.
Adjust/Maint.
Item Description
Adjust/
Maint.
Quiet Mode Lower print and scan speed for quiet processing.
Quiet Mode Set the Quiet Mode. Select this mode when the running noise is uncomfortable.
Value: Off, On
Each Job It is possible to set the use of Quiet Mode for each job, such as copying and
transmission. Set whether or not to permit the setting for each job.
Value: Permit, Prohibit
Copy Denst. Adj. Adjust copy density. Adjustment can be made in 7 levels.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Send/Box Density Adjust scan density. Adjustment can be made in 7 levels.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Backgrnd Density Darkens or lightens overall background density adjustment.
Copy(Auto) Darkens or lightens overall background density adjustment during copying. Adjustment
can be made in 7 levels.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Send/Box(Auto) Darkens or lightens overall background density when scanning images. Adjustment can
be made in 7 levels.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Print Density Adjust print density. Adjustment can be made in 5 levels.
Value: 1 (Lighter), 2, 3, 4, 5 (Darker)
AutoColorCorrect This setting allows you to adjust the detection level used by the machine to determine
whether the original is color or black and white in Auto Color Selection Mode. Setting a
lower value will result in more originals being identified as color, while a larger value will
tend to increase the number of originals being identified as black and white.
Value: 5 B & W to 1 Color
Correct. Bk Line Correct fine lines (streaks caused by contamination), which may appear on the image,
when the document processor is used.
Value
Off: No correction performed. Select this when you want to reproduce fine lines in
the original more clearly than with [On (Low)].
On (Low): Correction performed.
On (High): Select this item if a streak remains after using [On (Low)]. The
reproduction of fine lines on the original may become lighter than when using
[On (Low)].
To Next Page
Loading...
Need help?
General
