8-35
Setup and Registration (System Menu) > System Menu
Send
Configure settings for sending functions.
Send
Item Description
Send Select Key Set. Commonly used sending functions can be registered to the Select key. Functions
can be easily configured by pressing the Select key.
Value: None, Quiet Mode, Color Selection, Original Size, Original Image,
Scan Resolution, Sending Size, Zoom, Orig. Orientation, Continuous Scan,
File Format, File Name Entry, Subject/Body, JobFinish Notice,
FAX Resolution, FAX Direct TX, FAX Delayed TX, FAX RX Polling,
FAX TX Report, Density, Duplex, FTP Encrypted TX, File Separation,
Sharpness, Backgrnd Density, Prevent Bleed-t
Destination Check Set the confirmation of destinations.
*1
*1 Also applies when sending the fax.
Check beforeSend Select whether to display the confirmation screen of destinations after pressing
the [Start] key when performing sending jobs.
Value: Off, On
Check New Dest. When adding new destination, select whether to display the entry check screen
to check the entered destination.
Value: Off, On
New Dest. Entry Select whether to permit direct entry of destination.
*1
Value: Permit, Prohibit
Recall Dest. Select whether to permit usage of the [Address Recall/Pause] key on the Send
screen.
*1
Value: Permit, Prohibit
Default Screen Set the default screen displayed when you press the [Send] key.
Value: Destination, Address Book
Send and Forward Select whether to forward the original to another destination when sending
images.
Forward Select whether to forward the original.
Value: Off, On
When selecting [On], select rules to forward from [E-mail], [Folder (SMB)],
[Folder (FTP)], [FAX]
*2
.
*2 Displayed only on products with the fax function installed.
Destination Set the destination to forward to. Press the [OK] key to edit or delete
destinations.
Confirmation Displays the destinations that have been set.
Register Set the destination to which the original is forwarded. One destination can be
set. Follow the steps below to register the destination.
⢠Address Book
⢠Address Entry
Specifying Destination (page 5-16)