PaX-i3D Green (PHT-60CFO) User Manual
41
3 PaX-i3D Green Imaging System Overview
3.4
Marks and Symbols
Symbols Description Location
Alternate current -
Attention:
consult accompanying documents
Label
Dangerous voltage Power board
Protective earth (Ground) Power board
Off
(power: disconnect from the main switch)
Main switch
On (power: connect to the main switch) Main switch
TYPE B Equipment Label
Radiation hazard Label
EC representative Label
The CE symbol indicates that this product
complies with the European Directive for
Medical Devices 93/42/EEC as amended by
2007/47/EC as a class IIb device.
Label
UL mark: UL 60601-1 / CAN/CSA
C22.2 No.601.1 3ZY1
Label
Address where the equipment was
manufactured
Label
This symbol indicates that electrical and
electronic equipment must not be disposed
of as unsorted municipal waste and must be
collected separately.
Label
This symbol warns ESD hazard.
MCU board/
Board package
This symbol indicates that this equipment is
classied as a CLASS 1 LASER PRODUCT in
accordance with IEC 60825-1 ED.1 regulations.
Label
Date of manufacture Label
Refer to Instruction manual Label
[PI3DG_130U_44A_en]User Guide.indd 41 2016-05-24 오후 4:18:38
To Next Page
Loading...
Need help?
General
