RNS 310, RNS 315
Changing Sirius stations
Fig. 15 Station selection options. Fig. 16 Station list in the selected category.
Please first read and observe the safety in-
structions on page 3 and the introduc-
tory information on page 12.
Changing stations using the arrow buttons
• Press one of the arrow buttons on the device
⇒ page 6, fig. 1 to switch to the next station in
the selected category.
If is displayed, only the stations saved on the
station preset buttons are browsed through
⇒ page 15.
Configuring station selection options
• Press the function button in the Satel-
lite radio main menu ⇒ fig. 15.
• Activate the function button in the
pop-up window to show the station buttons in the
Satellite radio main menu ⇒ page 15.
• OR: Activate the checkbox in the func-
tion button to browse through the channels using
the tuning knob ⇒ page 6, fig. 1 .
• OR: Activate the checkbox in the
function button to open the station list view with
the tuning knob and open stations there.
Selecting satellite stations from the station list
All the activated stations in the chosen category
are displayed in the station list.
• Turn the tuning knob to open the list of avail-
able satellite stations in the selected category
⇒ fig. 16.
• Change category if required ⇒ page 19.
• Browse list and launch the desired station by
turning the tuning knob to select, then pressing it
⇒ page 8.
• Press the ⇒ page 6, fig. 1 button to close
the station list.
The list will close automatically after a a period of
inactivity.
SCAN
• Press the function button in the Satel-
lite radio main menu ⇒ fig. 15.
• Press the function button in the pop-up
window.
The function button switches to . All
stations are played for about 5 seconds each.
• Press the function button in order to stop
station scanning at the current station.
Scanning will also be stopped if a station is se-
lected manually using the arrow or station
buttons.
To Next Page
Loading...
Need help?
General
