RNS 310, RNS 315
Connecting external audio sources via Bluetooth
®
Fig. 24 Bluetooth audio mode. Fig. 25 Media selection menu with BT audio tagged.
Please first read and observe the safety in-
structions on page 3 and the introduc-
tory information and safety instructions on
page 21.
Bluetooth audio mode is only possible in vehicles
equipped with a factory-installed mobile phone
package that supports this function. To operate a
mobile telephone package, please refer to the
user's manual of the mobile telephone package in-
stalled in your vehicle.
In Bluetooth audio mode, audio files that are
played through an audio source connected via
Bluetooth
®
can be played through the vehicle
speakers. The external audio source must support
the A2DP Bluetooth profile.
The external audio source connected via Blue-
tooth
®
cannot be controlled through the radio
navigation system.
Starting Bluetooth audio transmission
• Pair or connect the external audio source fol-
lowing the instructions in the vehicle owner's
manual via the Bluetooth interface of the mobile
phone package.
• Reduce playback volume on the radio naviga-
tion system ⇒ page 8.
• Start playback on the external Bluetooth audio
source.
Some devices allow Bluetooth audio playback to
be started directly through the Media selection
menu⇒ page 26.
RNS 310: Activating Bluetooth audio
Some devices only require a one-time activation of
Bluetooth audio playback:
• After the initial start-up of a Bluetooth audio
transmission, a pop-up window opens.
• Request for confirmation of Bluetooth audio
playback.
• The display switches into Bluetooth audio
mode ⇒ fig. 24 and the checkbox in the
function button in the Media Setup
menu is automatically activated ⇒ page 30.
The checkbox in the function
button is deactivated in the factory settings.
If the function button in the
Media Settings menu is activated, the Media selec-
tion menu will be launched when Bluetooth audio
transmission has been started ⇒ page 26.
Starting Bluetooth audio playback
• Press the button in the MEDIA main
menu to open the Media selection menu.
• Select the Bluetooth function button, as de-
scribed ⇒ page 27.
Bluetooth audio mode is indicated on the screen
by BT audio or
.
When the playback of the external audio source is
finished, the radio navigation system remains in
the Bluetooth audio menu ⇒ fig. 24. A different
audio source must be selected manually
⇒ page 27.
The volume should be adjusted to match the
volume of the other audio sources
⇒ page 30.
On a connected Bluetooth audio source, all
warning and service tones, such as touch
tones on a mobile phone, should be switched off to
avoid interference and malfunctions.
Activate BT audio
Activate BT audio
Activate BT audio
MEDIA
Navigationssystem_111.5U6.N31_23.book Seite 26 Donnerstag, 22. April 2010 5:16 17
To Next Page
Loading...
Need help?
General
