RNS 310, RNS 315
Making and receiving additional calls
Fig. 77 Call waiting.
Please first read and note the introductory
information on page 64.
An additional call can be received during a phone
call. You can switch from one call to the other.
Call waiting: answering an additional incoming
call
• If another caller contacts you during when you
are on the phone, the incoming number or name
will be displayed on the screen. The message “...
waiting” will also appear.
• Press the function button reject the second
incoming call.
• OR: Press the left button.
• To answer the second call as well, press either
the call display or the function button.
• OR: Press the right button.
If the second call is answered, the connection to
the first caller will be interrupted but not ended
(Display: “Call on hold”.
Switching between two callers
• To switch between two callers, press the call
display symbol of the caller to whom you want to
switch.
• OR: Press the function button and click
on the function button in the pop-up
window.
As long as there is still a connection to one of the
two callers, the connection to the other one will be
maintained.
• Press the function button to end an active
call.
• OR: Press the left button.
You can only have one other caller on hold while
you are connected to another caller.
The phone “call waiting” function must be
activated.
The effect of the “Swap” function depends
on the hands-free protocol version that the
phone supports. For the functions outlined above
to apply, HFP 1.5 must be supported.
Starting a telephone conference
Fig. 78 Add multiple callers to a teleconference.
Please first read and note the introductory
information on page 64.
Callers who are “on hold” can be added to an ac-
tive teleconference.
Adding multiple callers to a teleconference
All callers who are part of a teleconference can
hear and speak to each other.
• Press the function button and press the
function button in the pop-up window
to add both callers to a teleconference.
The callers will both be displayed on the screen
with a “Conference ” marking.
An additional call can be received during an active
teleconference. You can toggle between the con-
ference and the new call or the caller can also be
added to the teleconference. Depending upon the
provider, teleconferences can have up to six partic-
ipants.
• Press the function button to end the tele-
conference and end connection to all callers.
Extras
Swap call
Extras
Conference
Navigationssystem_111.5U6.N31_23.book Seite 66 Donnerstag, 22. April 2010 5:16 17
To Next Page
Loading...
Need help?
General
