Navigation 45
111.5U6.N31.23
Destination memory
Introduction
In this section you’ll find information on the fol-
lowing:
Automatically saved recent destinations . . . . . . . . .
Saving destinations manually . . . . . . . . . . . . . . . . . .
Deleting or renaming address book entries . . . . . . .
Displaying the Info window and saving the vehicle
position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving or editing the home address . . . . . . . . . . . . .
The destination memory is used for the manual
saving of destinations.
Function buttons to save a trip destination are only
active and accessible if the the destination has
been sufficiently defined.
Stored destinations can be used for route guidance
and can be edited.
Supplementary information:
• Safety instructions ⇒ page 3
• Device overview ⇒ page 6
• Introduction to navigation ⇒ page 37
• Destination input ⇒ page 41
Automatically saved recent destinations
Fig. 53 List of recent destinations.
Please first read and observe the safety in-
structions on page 3 and the introduc-
tory information on page 45.
Destinations which were entered for route guid-
ance are automatically saved in the Last Destina-
tions list ⇒ fig. 53.
Older recent destinations are automatically over-
written by newer destinations if the list is full. In
order to permanently save a recent destination the
destination must be stored in the Destination
memory.
• Open the Last Destinations list via the Naviga-
tion main menu ⇒ page 37.
• Tag a listed destination which is to be added to
the recent destinations list ⇒ fig. 53.
• Press the function button to save the des-
tination ⇒ page 46.
45
46
46
47
48
Save
44
Navigationssystem_111.5U6.N31_23.book Seite 45 Donnerstag, 22. April 2010 5:16 17
To Next Page
Loading...
Need help?
General
