RNS 310, RNS 315
Navigation settings menu
Fig. 69 Navigation setup menu. Fig. 70 Navigation setup menu.
Please first read and observe the safety in-
structions on page 3 and the introduc-
tory information and safety instructions on
page 49.
Press the button in any navigation menu in
order to open the Navigation setup menu⇒ fig. 69.
SETUP
Function button: Effect
: ⇒ page 49.
: Rotate the tuning knob ⇒ page 6, fig. 1 to change the volume of the navigation an-
nouncements. In order to them switch off, turn to the left until OFF is displayed.
This is also adjustable via the general volume settings ⇒ page 67.
: Switching day or night map design in sync with the headlights.
: Map displays a bright day design.
: Map displays a dark night design.
: Points of interest (gas stations, parking, Volkswagen dealers) are shown as sym-
bols on the map.
: “Auto-zoom” is activated for Map view mode ⇒ page 51.
: Speed limits for the current street will be shown during route guidance as long as
they are saved in the navigation data ⇒ page 52.
: Duration is displayed during route guidance⇒ page 51.
: Displays the estimated time of arrival at the final destination.
: Displays the estimated duration of the journey to the final destination.
: Refer to Destination Memory ⇒ page 45.
: After starting route guidance, a virtual route guidance to the final destination can be
launched ⇒ page 55.
: If Demo mode is activated and the vehicle is not moving, a fictive starting point
can also be defined for the virtual route guidance.
Route options
Navigation volume
To Next Page
Loading...
Need help?
General
