Navigation 53
111.5U6.N31.23
Entering an intermediate destination
Fig. 67 Info window showing intermediate destination
during route guidance.
Please first read and observe the safety in-
structions on page 3 and the introduc-
tory information and safety instructions on
page 49.
During route guidance one additional destination
can be entered as an intermediate destination.
The entered intermediate destination is driven to
prior to continuing route guidance to the final des-
tination. The final trip destination is always the
destination for which route guidance was initially
started. Therefore proceed accordingly when en-
tering a destination and intermediate destination.
• In order to enter an intermediate destination,
first select the trip destination and start route
guidance ⇒ page 41.
• Press the button.
• Using the Navigation main menu, select the
additional destination similarly to the selection of
a final destination.
• Once route guidance to an additional destina-
tion has been started, a pop-up window opens.
• Press the function button in order to
drive to the new destination as intermediate desti-
nation prior to reaching the final destination.
• OR: Press the function button in
order to stop the current route guidance and start
route guidance only to the newly entered destina-
tion.
Press the ⇒ page 6, fig. 1 button to show the
intermediate destination in the Information
window⇒ fig. 67.
When an intermediate destination is reached, a re-
lated navigation message is issued. After several
seconds, route guidance to the final trip destina-
tion is resumed. One intermediate destination can
then be entered again.
If the function button is pressed during route
guidance to an intermediate destination
⇒ page 52, an option to delete the intermediate
destination will appear.
RNS 315: Displaying the Info window and Route list
Fig. 68 Route list during active route guidance.
Please first read and observe the safety in-
structions on page 3 and the introduc-
tory information and safety instructions on
page 49.
Info window during active route guidance
• In any navigation menu (except SETUP), press
the button in order to open the Info window
⇒ page 45.
During route guidance, the destination is dis-
played in the Info window. If an intermediate des-
tination has been additionally entered, it will be
displayed above the trip destination ⇒ fig. 67.
Displaying the route list
During active route guidance, an itinerary can be
displayed in the Info window.
NAV
Stopover
New destination
To Next Page
Loading...
Need help?
General
