10
Special tools
In all cases where it has been practically possible tools have been punched with their tool number, excluding
the last digit. The last digit (after the hyphen) is a check number.
873058 884140 884143
884161 884259884241884168 884263
884265 884266
839643-4 Drive repair welding rod (aluminum elec-
trode)
854668-1 Prop wrench for 16 mm bolt cone
873058-2 Prop wrench for 20 mm bolt cone
884140-5 Expander, dismantling of bearings – inter-
mediate
884143-9
1)
Standard handle, pointed – lower and in-
termediate
884161-1 Tool to remove propeller bearing and low-
er intermediate shaft
884168-6 Bearing press drift – upper, intermediate
and lower
1)
Used together with special tools 884281, 884140 and 884381
884241-1 Tool to install the needle bearing of the
vertical shaft – lower
884259-3 Drift, bearing installer/remover – interme-
diate
884263-5 Drift for the assembly of bearings on pro-
peller shaft and input gear wheel in upper
gear
884265-0 Sleeve for removing gear wheel and bear-
ing on propeller shaft
884266-8 Drift for the assembly of bearing on verti-
cal shaft
854668839643
To Next Page
Loading...
Need help?
General
